BI 530R TREK is a surveillance device that provides a solution to remote control and full control over various vehicles. With its help, complex navigation tasks are solved when it is necessary to obtain data in real time. For which you need to connect additional sensors. This ensures that information about the object is received accurately, eliminating delays.
Installation BI 530R TREK allows you to collect information from additional equipment and existing sensors. Due to this, data about the speed of movement, coordinates of location and mileage is collected, and then they are sent via GPRS.
BI 530R TREK surveillance devices can be installed on several vehicles at once, in order to later collect information in a single control center. In this case, one employee is enough to quickly process all incoming information and timely adjust the movement.
Interesting opportunities
The BI 530R TREK surveillance device is one of the most convenient and easy to configure. It has a number of features that expand the possibilities of creating a complex monitoring and remote control system:
- synchronization of installed firmware via a cloud service;
- protection of power circuits at the highest level;
- function for detecting jamming of GSM signals;
- use of MicroSIM;
- 2 digital outputs;
- 3 discrete and 2 analog inputs for connecting equipment;
- RS 485;
- quality control and monitoring of the ignition system;
- own battery 130 mA;
- the ability to save up to 50,000 records with automatic data sending immediately when access to GPRS appears;
- option to remotely reinstall the firmware, as well as all hardware settings;
- compatible with common software and open protocol.
These advantages provide a wide range of customization options, allowing an experienced programmer to adjust control over the system depending on the goals set. This ensures stability and prevents data loss even when there is no connection to the control center.
Installing a SIM card
Need to monitor vehicles? The BI 530R TREK is worth choosing. This device has a reasonable cost and important features that allow you to freely connect the necessary sensors and additional equipment with subsequent synchronization with the control center.
Device connectors
Documentation:
Main | |
Analog input voltage range | From 0V to 27V |
Analog inputs | 2 |
Battery Capacity | 130 mAh |
Body material | ABS plastic UL94 V0 |
Channels of connection | GPRS, SMS |
Data transfer standard | GSM 900/1800 |
Digital interfaces | RS-485 |
Dimensions | 77х96х14 mm |
Enclosure class | IP 54 |
G-sensor: | + |
GPRS class | 10 |
GPS and GSM antennas | Internal |
Maximum current of discrete outputs | 0.5 A |
Number of discrete inputs with active "0" | 1 |
Number of discrete outputs | 2 |
Power type | Permanent |
Power voltage | From 6V to 36V |
SIM cards | 1 |
The number of discrete inputs with the active "1" | 2 |
Type of discrete outputs | Open collector |
Type of navigation system | GPS or Glonass / GPS, LBS |
Typical current consumption (12V) | 40 mA |
Voltage range of discrete outputs | From 0V to 40V |
Volume of non-volatile memory | 2 MB (or 50,000 entries) |
Weight | 75 gr |
Working humidity | (80±15)% |
Working temperature | From -30 ° С to + 80 ° С |
Tags: tracker, autonomous, mileage, coordinates, speed, ignition control, stable signal, synchronization, tracker