Teltonika FMB110 is a miniature tracker with built-in GSM and GNSS antennas. The device is well suited for fleet management, logistics tasks and other areas where data on changes in the location of remote objects is required.
Accident detection based on accelerometer readings. The notification is sent to the user immediately after an incident is detected.
Bluetooth 4.0 LE makes it possible to connect various wireless sensors, such as temperature, humidity, headphones, OBDII dongle, Inateck barcode scanner, universal BLE sensors. The module is compatible with the options of the previous version 3.0 (software update, headset connection, etc.).
1-Wire protocol allowing connection of up to 4 temperature sensors. It also implements driver recognition with iButton keys, preventing third parties from using the car.
Digital outputs and inputs allow remote monitoring and control of vehicle health.
Functionality
- Ignition recognition can be realized according to data from an accelerometer sensor, a CAN adapter, via a digital input or an OBDII dongle.
- Control of digital outputs, debugging and configuration is possible via GPRS or SMS commands.
- The device has 4 sleep modes. Ultra-deep sleep has the lowest energy consumption. There are also sleep modes with GPS and support for connecting to the server.
- You can update the firmware via a mobile application, FOTA Web or Teltonika configurator for a computer (either with a USB cable or remotely using Bluetooth).
- If you do not have access to GPS, you can synchronize the time through the NTP and NITZ protocols.
- Fuel tracking is realized by an analog method, by connecting to a CAN bus using an adapter or by means of an OBDII dongle.
- In the scripts of the device, notifications about a number of events are provided: about violation of the speed limit, idling, the beginning and end of the trip, about reading the iButton, about the overlapping of the GSM signal.
- GNSS fuel consumption calculation option.
- Recognition of accidents and car towing.
- Automatic geofencing.
Documentation
Drivers
Certificates
Specification | |
Baud rate | Hot start <1 s
warm start <25 s Cold start <35 s |
GPS module | Receiver 33 channels
GNSS receiver sensitivity -165 dBm GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS |
Humidity | 5% to 95% non-condensing |
Accuracy | < 3 m |
GSM module | Quad-band 850/900/1800 / 1900MHz |
Power consumption | At 12V <5 mA (Ultra Deep Sleep Mode)
At 12V <6 mA (Deep Sleep Mode) At 12V <7 mA (Sleep Online) At 12V <17 mA (GPS Sleep) At 12V <35 mA (nominal) |
Data channels | GPRS class 12 (up to 240kbps), GPRS Mobile station class B, SMS (text / data) |
Technology | GSM/GPRS/GNSS/BLUETOOTH |
Power supply voltage | 10-30V DC with overvoltage protection |
Interfaces | Digital input: 3
Digital output: 2 Analog input: 2 CAN adapter inputs: 1 1-Wire: 1 GNSS antenna: Internal GSM antenna: Internal USB: 2.0 Micro-USB LED Indication: 2 LED indicators SIM: Micro-SIM + eSIM |
Water and dust protection | IP41 |
Bluetooth | Specification: 4.0 + LE
Supported peripherals: temperature and humidity sensor, headphones, OBDII dongle, Inateck barcode scanner, support for universal BLE sensors |
Weight, g | 50 g |
Operating temperature | -25 °C to +55 °C |
Dimensions (W x D x H) | 65 x 56.6 x 20.6 mm |
Tags: compact, tracker, vehicle tracking, Bluetooth, GSM, GNSS, 1-Wire, alarm detection