How to control fuel consumption using CAN-bus GPS tracker?

In this brief review, we will tell you about our new OBDII tracker, which is connected to the diagnostic connector of most cars and can read the CAN-bus data of the onboard computer according to the J1939 standard. Price of the tracker here.

To install the device, just insert it into the diagnostic connector of the car. This connector is usually located in an easily accessible place for most cars. Often, the diagnostic connector is covered with a panel that interferes with the installation of a GPS tracker. For this, an extension cable can be used, which is not often needed and is purchased separately.

Key Features and Features

• The acceleration sensor is used to analyze the aggressive driving of the driver and records the fact of the accident.
• Built-in backup battery with a capacity of 170 mA / h.
• SD card is used to record the route of movement in areas of unstable mobile communications. For example, in some parts of the route between cities.
• Built-in Bluetooth 4.0, which can be used to configure the device, connect additional Bluetooth sensors, read diagnostic data from the CAN bus by a mobile phone.
• Extra input to control the ignition of the car.
• The sensor of towing a car is used as a protection against theft.
• Power supply from 10 to 30V is suitable for automobile and trucks.

Software features (WEB version, iOS, Android apps):

• Exact location.
• Exact mileage.
• Driving directions.
• Parking and stopping.
• All data is stored for more than 1 year.
• Engine hour meter.

In addition to standard functions, information is transmitted to the system:

• Fuel level.
• Engine load.
• Coolant temperature.
• Engine speed.
• Onboard vehicle Voltage.
• Backup battery voltage.
• Throttle Position.
• Engine oil temperature.