Control of aggressive driving or how to make the driver take good care of the car

To control aggressive, sloppy driving, GPSM offers a Driving Style Control Module.

GPSM allows you to:

1. Rate the impacts on the chassis of the vehicle.
   
2. Identify accidents.
3. Check the driver's driving style.
4. Provide driver ratings. Those who drive accurately and economically - assign bonuses, sloppy drivers - set fines. The system gives an integrated score for driving neat, giving a high score for driving neat and low based on the number of fines. Penalties can be imposed for hitting the pits, hitting the chassis, sharp aggressive maneuvers.

How does the aggressive driving control system work?

A GPSM tracker is installed in the car, which has a built-in accelerometer (three-axis acceleration sensor) and an input for connecting to the car's CAN-bus for reading on-board parameters.

A number of criteria are taken to evaluate driving accuracy, which may differ from vehicle to vehicle. The most popular are:

1. Control of critical accelerations. Critically accelerations are divided into:

• Aggressive maneuvers
  
• Blows

For aggressive maneuvers, the driver is fined 1 point.

For falling into the pit (hitting the chassis) a penalty of 2 points.

2. Control of the force of pressing the gas pedal. The force of pressing the accelerator pedal is read via the CAN bus. If the driver constantly presses the accelerator pedal, the fuel consumption increases significantly. At the same time, in urban conditions, the force of pressing the gas pedal does not lead to an acceleration of getting from point A to point B. The risk of getting into an accident, engine wear, and destruction of the chassis of the car increases. As a rule, constantly squeezing the gas to the floor is typical for “twitchy” drivers. For business, this style of driving a hired driver does nothing good.

3. Control of the force of pressing the brake pedal. Smooth braking Smooth acceleration characterizes the driver who is driving in economy mode, reduces tire wear. This criterion also applies to monitoring the operation of the ABS.

4. Control of the speed of acceleration and deceleration. The data is taken from the readings of the three-axis accelerometer, which is transmitted by the GPS tracker.

5. Exceeding the speed limit. In addition to compliance with traffic rules, it allows you to reduce fuel consumption and reduce the risk of an accident. Data is taken from GPS readings.

You can specify both the lower and upper values:

The criteria for assessing the quality of driving are indicated individually for each type of car in the settings:

To assess “ideal driving”, you need to drive:

Stopping several times and accelerating along a good road.

1. Drive carefully on a bad road. If it is impossible to go around the hole, you must roll over it slowly.
2. The sensor readings collected for this reference ride are used as a basis for judging driving. If the critical acceleration exceeds the reference delay, the driver will be penalized. A driver who drives without violations of these parameters is given high marks.

If the same vehicles with the same trackers are used, the ratings of the driving criteria are indicated the same. Our company provides free ready-made templates for setting up accurate driving controls for:

• Cars
  
• Trucks
• Buses

Example for a car:

For a truck:

Criteria for assessing the quality of bus driving:

Conclusion

As a result, the driving evaluation window displays the summary information about the driving quality for the selected periods, indicating:

• Object names
  
• Estimates
  
• Fines
  
• Violations
  
• Duration of trips
  
• Mileage
  
• Number of trips

The system quickly processes and displays the driving quality for any selected period: yesterday, today, week, month, any period (data is stored for 1 year):

In addition to general assessments, the system displays a decoding for each vehicle:

The system is indispensable if you want to know how your fleet is used and if you want to keep it intact, reduce the number of accidents, wear and tear of equipment, and avoid careless exploitation by unscrupulous drivers. We know that most of the hired drivers belong to the property of the company, “I don’t mind you,” an automatic control tool has been created for such drivers. Automate business processes, introduce new quality standards, and your business will operate like a reliable German machine.

Consultation

GPSM specialists are ready to help you choose the best solution for your business. To order a turnkey installation, call 044 362 29 56, 097 696 84 07 or send a request to info@gpsm.ua. We will promptly call you back and send you a letter with a commercial offer.

Our staff is represented by real professionals with extensive experience. We have successfully implemented a comprehensive monitoring system on vehicles such as trucks, public transport, agricultural, construction, road equipment and others.

Take a modern approach to improve the efficiency and profit of your business! The GPS vehicle monitoring complex is a reliable method for optimizing the operation of a vehicle fleet and reducing the cost of its maintenance by 25-40%. Investments in the implementation of a transport control system pay off within a few months. Cut your fuel and spare parts costs today!

Our Instagram: https://www.instagram.com/gpsm.ua/

Our Facebook: https://www.facebook.com/gpsm.ua/