GPSM sells high-performance equipment for gas stations on favorable terms. Column "Shelf 200-3", designed for simultaneous delivery of fuel to both sides. The complex is equipped with six hoses and can be used to dispense one of three types of fuel through a separate channel.
The fuel dispenser model "Shelf 200-3" is used in filling stations and is designed to work with liquid fuels and lubricants. The equipment is designed for dispensing various types of fuel: diesel, gasoline with different octane numbers and kerosene. The viscosity of the fuel is in the range from 0.55 to 40.0 mm2/s. Built-in meters provide accurate determination of dispensed volumes with subsequent calculation of its cost and display of the result on the display.
Functional block layout
Main parameters and functional capabilities of the Shelf 200-3 fuel dispenser
As standard, the proposed filling complex is equipped with three pumps, pressure gauges, impulse and position sensors according to the number of types of fuel. The column is controlled by an electronic calculating unit based on the Atmel processor. The possibility of working from the remote control is provided. The manufacturer offers an extensive list of additional equipment:
- High-contrast LED display.
- Satellite for simultaneous filling of two tanks on both sides.
- Remote pumping unit.
- Fuel delivery channel with increased flow rate up to 90 l / min.
- System for safe removal of fuel vapors.
The Shelf 200-3 universal fueling dispenser is produced for a zone with a temperate climate.
Wiring diagram
Shelf hydraulic part and electrical engineering are distinguished by the highest reliability, MTBF is not less than 7000 hours. The protective and decorative coating is resistant to environmental influences and is able to maintain an attractive appearance throughout the entire service life.
Schematic connection diagram
Additional equipment:
- LED display
- OPW crane type
- Electric motor 220V
- Satellite
- High-speed channel with a capacity of 90 l/min.
Certificates
- Conclusion of the state sanitary and epidemiological examination
- Permission to use the fuel dispenser
- Explosion protection certificate for electrical equipment
- Certificate of conformity of measuring instruments to the approved type
- Certificate of conformity
- Type examination certificate
- Fuel dispenser type inspection certificate
| Fuel dispenser specifications | |
| Nominal productivity, l/min | 50/90 |
| Error | ±0,5% |
| Minimum dose of fuel delivery, l | 2/10 |
| Number of taps | 6 |
| Electronic calibration | + |
| Number of pumps | 3 |
| Type of fuel | gasoline, dp, biodiesel (100%) or E15 |
| Working temperature | -25/+55°С |
| Powering | 230/400V +/- 10%, 50 Hz+/- 2Hz |
| User identification | ЕК Dallas |
| Hose length, m | 4 |
| Display | backlit LCD / LED |
| Total fuel counter | Electronic 12-digit |
| Single dose counter capacity | 9999,99 l |
| Dimensions H*W*D, mm, no more | 2285/1600/570 |
| Dimensions with packaging H*W*D, mm | 2335/1700/760 |
| Weight, kg, not more | 415, 327(without pumps) |
Tags: high-performance, filling complex, gas station, highest reliability, basic configuration, additional equipment, universal
- Brand: Shelf
- Product Code: 200-3
-
- Availability: In Stock
- Guarantee: 12 months
