Airport apron bus displays

Placards for airport buses are placed on vehicles delivering passengers from boarding to the airport territory and in the opposite direction. It can be placed both on the windshield and in the side areas. Often for the bus they purchase a pair of boards at once, duplicating each other's information. The board shows the points of departure and destination of the flight followed by the vehicle. It works from the on-board electrical network of the bus (9-35 V). The device is compatible with many common autoinformers.

The board is produced in two versions, differing in size and number of colors. So, for example, one model has bright yellow LEDs and dimensions 96x16x6 cm, and the other has 7 shades of glow (iridescent RGB LEDs) and dimensions 76.8x12.8x5 cm.

Interesting features of the model:

• The control takes place remotely, from a server installed at the airport, via a GSM channel. Integration protocols are provided. Thanks to the continuous polling, it is possible to display the flight you need right now. Thus, one bus can serve more than one route. Ethernet configuration provided.
  
• LEDs can work up to 100 thousand hours.
• Display resolution - 96x16px, viewing angle - 120 degrees.
• The model is capable of operating at temperatures from -35 to +55 degrees. The composite housing guarantees protection from dust and splashing rain, but the device is not completely invulnerable to water.
• The end parts have 2 holes for fastening.

Thanks to diodes with a bright glow, information from the board is read at a great distance (up to 40 m), including at night. It is possible to create a custom-made device for service airport transport with sharpening for a specific bus.