BI RF CONNECT

The main purpose of the RF02 module of the Bitrek Connect system is to interact with RFID readers of electronic cards. In this case, the cards must use the RS485 interface and the RCS SOVA protocol.

Interesting features of the model

The module reads the card number, as well as the validity status, and then compares it with the data in its memory. If there is no such number there, then it is recorded under the status of someone else's card. The RF02 module then transmits this data to the Connect Bus.

Features of the module:

• Other modules of the Bitrek Connect system can work with device information.
  
• The device has an autonomous memory where statuses and card numbers are stored, the maximum number of which is 4096.
• The RF02 device can operate in two modes of data length for working with cards: with a full card key (5 bytes long) or incomplete (4 bytes long).
• The maximum number of RFID readers that can work with the module is 4 pcs.
• The database of all recorded data will be the same for all connected readers.

Documentation:

• Manual
• BITREK_Connect_A4_EN.pdf
• BITREK_protocol_EN.pdf
• BITREK_IPS_protocol_RU v.2016.10.1.pdf
• Bitrek_Configurator_1.13.1b.zip
• Connect Configurator v.2.14.7 (libs from 15.02.2021).zip
• WIALON.pdf